Kenwood kitchen machine: working with attachments

turn it tighter

at the end, I will even change the gain to pull out the bowl. Again, this is only with a tight dough.

And why is she, who uses it?

I always make a biscuit with a souffle (first with a whisk, and after adding flour - with a souffle). I love. The dough, of course, settles a little, but it behaves in the same way from mixing with a spatula. But with a spatula, I personally find it difficult to knead large volumes of dough. So for me a soufflake is a very necessary thing.

Does everyone use the paddle (gray) that came with Kenwood? If someone has it idle, then I would buy it with great pleasure.

[Nina]

URAAAA! I'm not alone in this world !!!!!!!

Nina, scapula is sold separately in professional service)
In general, the spatula is a good, very convenient thing!

I looked there, but there is only white. And about the gray it says "Out of stock", but I just need it.

[Nina]

Nina, well, they bring it to order

[Marina]

Marina, Thank you, I'll try to order from them))

I’ll come up, turn it tighter with my hands, it seems to stop. But every time it starts to ride

Here! My bowl often dangles too.

Here! My bowl often dangles too.

and I constantly have to twist the bowl ...

[Nina]

but only white is available. And about the gray it says "Out of stock", but I just need it.

Nina, but what is the difference between white and gray shoulder blades? Maybe I don't know something and I also need a gray one?

[Natalia K.]

Natalia K., white not for heating, only for cold food.

[NatalyaB]

NatalyaB, and gray with hot ones is not very ... I do not risk it!
I reread the last pages ... yes, we are strong!
Yesterday I was kneading the old flaxie cake dough, but I didn't know how to compare ... tomorrow I'll do it again, I'll try a new one.

Virgin, and who makes what kind of dumplings for rolling XL?
Is chopped food processor good?

Girls!! Take a look! I'll try to find it in a different format, but so far !!
Directly accurate, visual, and, most importantly, an overview of ALL juicers LIVE !!
🔗

URAAAA! I'm not alone in this world !!!!!!!

Far from alone, and I have a difficult relationship with hand graters. Since there are no vampires or other lovers of human blood in the family, she mechanized this process as much as possible.

complex relationship with hand graters

I have, one might say, a bloody drama with them, only because of this I began to buy my own devices!

At one time I really wanted a souffleika, I didn't get it. And now I don't want to. I mix flour in the biscuit with flexi, it doesn't settle very much. I tried it with a spatula with my hands and flexi, in my opinion, I use my hands to upset more. I beat it with a fluffy whisk, I forgot the fat one when I got it. Flexy, on the other hand, whip up sour cream, and sometimes butter.
I want an AT 340 vegetable cutter. At first I didn't buy for some reason at a more adequate price, but now the prices are generally not encouraging.

Sometimes I grind my fingers on handheld devices. But I bought gloves "fireproof" and now I rub everything without fear. I have small volumes, sometimes just hands faster.

What do you call a souffleika?

What do you call a souffleika?

This nozzle ---- ≥≥ 🔗

Thank you! I don’t have one, it turns out.

I don’t have one, it turns out.

But you must?

[Natalia K.]

Natalia K., well, how can I tell you ...I have lived without her for so many years, I think I will live more, given that I am not a fan of biscuits.

Nina, what is the difference between white and gray shoulder blades? Maybe I don't know something and I also need a gray one?

Gray is more comfortable for me, because it is more authentic and harder.

Here! My bowl often dangles too.

Me too. I wonder if you can squeeze something in there or do something else so that she does not hang out.
Girls, is the fluffy corolla KW716840?

Is the fluffy corolla KW716840?

Yes.
From the reference: furry (12 rods) - new KW716840, old KW712207.
New and old - we mean the articles of the same rim.

Girls! Please tell me if you need an adapter for the new 9060 to the nozzles? If at the moment there is 6320 and a meat grinder for it, it is worth buying an adapter. In the reference book it would be worth re-uploading a photo, well, honestly, it's already inconvenient to ask. What do they generally look like old and new puzzles?
I am looking at the new Kenya model, but they are selling it from hands for 40 thousand 096. The food processor does not even have plastic removed from the disks! Sells because "Thermomix recipes don't fit."
Well, what kind of dance will I have with an adapter?
Or even stay with 6320 and buy multi smart kenwood?

[Anastasia]

Anastasia, now I'll take a look and write ..

Me too. I wonder if you can squeeze something in there or do something else so that she does not hang out.

I put in a silicone potholder.

[Stasia]

Yes.
From the reference: furry (12 rods) - new KW716840, old KW712207.
New and old - we mean the articles of the same rim.

Thank you))

What do they generally look like old and new puzzles?

Stasia, the old one is a straight strip, like a "minus". New Hexagon.

About adapters)
I here zvezdy - Olya tortured, tried to understand about what "dances with tambourines" you write. I took a chance and bought the necessary nozzle, adapter. I did it according to the instructions: first the adapter, then the nozzle ... I spat for a long time, scolded myself that I did not listen to smart people. And then, first, I fixed the adapter on the nozzle, and then everything together on the machine. Everything works wonderfully, does not stagger, does not sag. The connection is reliable, all without a tambourine))

Sells because "Thermomix recipes don't fit."

The evening was a success !!!!!!!!

[smslisa]

I have a hexagon. Now figure out: 096 pin, and 9060 hex? Or vice versa? And they stopped releasing the pin, right?
smslisa, Oksana. I trust your experience. But I want to understand something!




And by the way, on which page did Pavel1 parse 096?

9060 hexagon

Sorry ,, distracted a little ,, you have nozzles HOW !! An adapter is needed for AT.

[Stasia]

Stasia, ceased to produce flat, on new machines a hexagon. Allen key marked KAX, flat = old AT version

By the way, just in case, maybe there is an owner of an AT 941 mill, which, on the contrary, has a new type of combine with KAX attachments. It would be possible to change (it is possible not even with the whole mill, but only with the stocks). I have a KAX941 mill, I have to use it through an adapter. Maybe someone has the same problem, just the opposite.

[Air]

Air, Nina! So it is full of them on various foreign resources. All different.

[Nina]

Nina, let's try! I want to go to KAH, but I have AT ... all the more so because we are nearby you can come and immediately see how that will rise! I have both the one and the other bayonet ...

[Olya]

Olya, come on))

And who ever tried to make carrots in Korean on a spiralizer? Does it work or not? I caught fire with this nozzle.

[Stasia]

Stasia, on the smallest spiral grater, the carrot turns out to be thin, long thin spirals. I don’t do Korean, but I like it for salad or for stewing with other vegetables. Skinny looks very similar to those Korean salads that are on sale.

[masha20990]

masha20990Thank you so much for the advice - https://Mcooker-enn.tomathouse.com/in...798.0
I used it, but in a more lightweight way: an old stool and cardboard.



Who else bothers with the potato pancake disc? Do not hesitate, do it. It is such happiness to get what you want in a moment without bloody fingers.

[Stasia]

Stasia, the girls did, you need the topic of spiralizers. All the wisdom is there. Plus, the cones of Kenwood, Moulinex and Gemlux are interchangeable, but with different cutting thicknesses. The girls were shamanizing there. The manual spiralizer did not fit me. And rub the carrots with Berner

Good day! Girls can poke a nose, read tired and urgently want to buy while my husband is ready😊. I've been going for a long time, I want a cube cutter, but so far I've been going, there are none, I have a major roofing felts of km10 or 20. As I understand, I need an adapter for Kenwood KAX400. I am not a skilled internet user. Therefore, I will be grateful for your help. The question is, did I find the nozzle correctly, and what adapter is needed. Well, ideally, where is it better to buy?

[cvetlk]

cvetlk, Sveta! If you have a Major, then KM020 (he has a large bowl = -6.7 l), and KM010 with a small bowl = 4.6 l
You need a model MGX400 cube cutter - for machines with the old mounting system (beam system - pin), it will fit your machine without any adapter. And KAX 400 is for new cars-9040,9060

Lena! Thank you so much! MGX400 says about them that they have been discontinued. I was looking for it, I didn't find it

[cvetlk]

cvetlk, Sveta! Avito is full. Type in the name in the search engine and see. Here is one of them, for example:
🔗
There are several of them, they appear and disappear. Choose the most convenient and cheapest option for you.

Got it! Thank you very much!

[cvetlk]

cvetlk, on this forum, in the "bulletin board" section about accessories, there is an advertisement for the Catwoman from the sale of mgx400. True, still in March, but, it seems, alive.
And so through the adapter and a new nozzle can be used. Fine. I have the opposite case: a car with a new mount, and the attachments were bought at a time when they were mainly on sale old. And she was not too literate. I use the old cube cutter (and the meat grinder) through an adapter on the new km, no problems.

It is also possible through an adapter. But it is better, if possible, to do without an adapter.

And yet, does anyone have a 910 curly paste attachment? What can you say about her. A smart thing?