TRACTOR
Tuning of the Kenwood BM 250 bread machine
In a bread maker, the most interesting thing is to observe the kneading process, but it is a little dark to observe through the window, and opening the lid breaks the thermal regime, and it is not convenient. Therefore, it was decided to highlight the insides of the Kenwood BM 250 bread maker. Having available a 5-centimeter piece of LED strip, I made it out of it.
First, we disassemble the bread maker. On the board, we find a constant voltage of 12 volts, solder the wires and bring them to the holders of the lid of the bread machine. Slip rings were made from 0.4 mm thick copper foil and simply melted into plastic.
Secondly, we disassemble the cover and glue the LED strip there
Tuning of the Kenwood BM 250 bread machine
(for better direction, I had to solder the LEDs 90 degrees) with soldered wires. We bring the wires to the "hinges" of the cover and fuse the slip rings.
We collect everything, plug it into the outlet and click the switch. Everything, the backlight should work, enjoy! Attention! This text is not a guide to action. I just share my revision and want to know the opinion of the bakers.
rinishek
Blimey!
this is great! but really cool!
the truth is, I personally closed my window with foil, because the Mulinex 2000s have an eternally white top, but it turned out interesting anyway
OlennaTM
What does a male approach to business mean! Well done! And I just use a LED flashlight
TRACTOR
Thank you, we also first used a flashlight, but then decided to make a stationary backlight. Next in line is a small screen.
Kamusik
Cool! But, nothing is disturbed, the kneading can be done at all with the lid open.

All recipes

New recipe

New Topics

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers