Multicooker Polaris PMC 0531AD

Power - 860 W
Volume - 5 L
Ceramic coated bowl with handles
Touch control panel
Removable inner cover
Pre-switching off the auto-heating function
Multipovar PLUS with 2 ° C steps
Power outage memory
Dimensions (WxHxD) - 31x26x41cm
Weight - 4.50kg

Display

Description of automatic programs (modes):

Program	Temperature, ° С	Time, min	Description
Jelly	93	2 hours (1-8)	The default time is 2 hours. Time adjustment: from 1 to 8 hours, in steps of 30 minutes.
Extinguishing	93	2 hours (1-8)	The default time is 2 hours. Time adjustment: from 1 to 8 hours, in steps of 30 minutes.
Frying in oil	100-160	15 (10-60)	The default time is 15 minutes. Time adjustment: from 10 minutes to 1 hour, in steps of 5 minutes. Cooking temperature: 100-160 ℃, step 10 ° С
Frying	100-160	15 (5-60)	The default time is 15 minutes. Time adjustment: from 10 minutes to 1 hour, in steps of 5 minutes. Cooking temperature: 100-160 ℃, step 10 ° С
Baking	145	45 (20-150)	Default time: 45 minutes. Time adjustment: from 20 minutes to 2 hours 30 minutes, in steps of 5 minutes.
BREAD	140-160	3 ((30-150)+(30-120))	Default time: 3 hours (stage 1 2 hours, stage 2 1 hour). Time adjustment: stage 1 from 30 minutes to 2.5 hours, stage 2 from 30 minutes to 2 hours. Step 5 minutes. Temperature regulation at stage 2: from 140C to 160C, step 10C.
Bakery products	118-122	60 (30-210)	Default time: 1 hour. Time adjustment: from 30 minutes to 3.5 hours, in 10 minutes increments.
Pizza	120-160	30 (20-60)	The default time is 30 minutes. Time adjustment: from 20 minutes to 1 hour, in steps of 5 minutes.
Paste	118-120	8 (8-20)	The default time is 8 minutes. Time adjustment: 8 to 20 minutes in 1 minute increments.
Soup	97	60 (60-240)	Default time: 1 hour. Time adjustment: from 1 to 4 hours, in 10 minutes increments.
Yogurt	38-42	8 hours (6-12)	The default time is 8 hours. Time adjustment: from 6 to 12 hours, in steps of 30 minutes.
FOR PAIR	115-120	5 (5-60)	The default time is 5 minutes. Time adjustment: from 5 minutes to 1 hour, in 1 minute increments. A special steamer tray is supplied with the device.
Jam	100-108	60 (1-4 hours)	Default time: 1 hour. Time adjustment: from 1 to 4 hours, in steps of 5 minutes.
Oatmeal	90-100	30 (15-60)	The default time is 30 minutes. Time adjustment: from 15 minutes to 1 hour, in steps of 5 minutes. Temperature 90-100 ° С auto.
Beans	93	60 (1-4 hours)	Default time: 1 hour. Time adjustment: from 1 to 4 hours, in 10 minute increments.
Milk porridge	96	35 (10-60)	The default time is 35 minutes. Time adjustment: from 10 minutes to 1 hour 30 minutes, in steps of 5 minutes.
Pilaf	100-150	40 (20-120)	The default time is 40 minutes. Time adjustment: from 20 minutes to 2 hours, in steps of 5 minutes. Temperature 100 - 150 ° С auto.
CEREALS	100-135	40 (20-60)	The default time is 40 minutes. Time adjustment: from 20 minutes to 1 hour, in steps of 5 minutes. Temperature 100-135 ° С auto.
Dumplings	100-108	5 (5-45)	The default time is 5 minutes. Time adjustment: 5 to 45 minutes in 1 minute increments. Temperature 100-108 ° C.
Warming up	115	20(10-60)	The default time is 20 minutes. Time adjustment: from 10 minutes to 1 hour, in steps of 5 minutes.

[5 ° C (in the range from 30 to 90 ° C), by 2 ° C (in the range from 90 to 110 ° C) or by 10 ° C (in the temperature range from 110 to 160 ° C)]

Manual Mode Description:
Multicook

Select the "Multipovar" program using the "MENU" sensor. Set the cooking temperature by touching the “TEMPERATURE” sensor. Each subsequent touch of this sensor increases the temperature by 5 ° C (in the range from 30 to 90 ° C), by 2 ° C (in the range from 90 to 110 ° C) or by 10 ° C (in the temperature range from 110 to 160 ° C).

Touch the “HOUR / MINUTE” sensor and set the time using the “+ and -” sensors. Set the cooking hours in 1 hour increments, then touch the HOURS / MINUTES sensor again and set the cooking minutes in 5 minute increments. The maximum possible time for setting is 12 hours.

After finishing the programming, hold down the START sensor, the multicooker will emit a sound signal (if it has not been turned off earlier) and starts the program. The countdown of the execution time will begin immediately after pressing the “START” sensor.This program implements the memorization of the last settings. After touching the “START” sensor, the values ​​of the programmed values ​​of temperature and time are entered into the permanent memory of the device and will be displayed during subsequent switching on. In the program "Multipovar" it is possible to control the cooking process. At any time, you can open the lid, check the degree of readiness, making sure that the food is completely ready, turn off the device. At the end of the operating time, the multicooker will emit a sound signal, if it has not been turned off earlier. The unit will automatically enter the HEATING mode if it has not been canceled earlier. In the HEATING mode, the display will show a direct countdown showing how long the food has been heated.

Multicook Plus

Select the "Multipovar Plus" program by touching the sensor of the same name. At the same time on the display the inscription "Multipovar" will blink, in the upper left corner of the display will light up the number "1", which indicates that the setting of the first stage of the program is enabled.

Set the time and temperature (see Multi-Cook above).

To proceed to the programming of the next stage, touch the “Multipovar PLUS” sensor again, the number “2” will light up in the upper left corner of the display, which indicates that the setting of the second stage of the program is enabled. Program the temperature and time according to the above algorithm.

To program the third stage, touch the “Multipovar PLUS” sensor again, the number “3” will light up in the upper left corner of the display. Temperature and time programming is done in the same way.

After completing the programming of the required number of steps, hold down the “START” sensor for 2 seconds, the program will emit a sound signal (if it has not been disabled earlier) and will sequentially execute the programmed steps from 1 to the one that was displayed on the stage indicator at the moment of touching the sensor "START". The set time of the stage execution, the inscription “Multipovar” on the display, as well as the indicator of the sensor “START” will light up constantly. The countdown of the stage execution time will begin immediately after pressing the “START” sensor. The temperature and time values ​​at each selected stage are entered into the permanent memory of the device and will be displayed during subsequent switching on.

The maximum operating time of a multi-stage multi-cook is 16 hours. The maximum time to complete a stage on the "Multipovar" and "Multipovar Plus" programs at temperatures from 150 to 160 ° C is 3 hours, this limitation allows to increase the service life of the ceramic coating of the bowl.

How beautiful she is!
I'll tell you how I came to the decision to buy this particular model of the multicooker. In January of this year, I came to the conclusion that I needed a new multicooker, I got into the Brand 6051 pressure cooker, after reading just one review on one site (oh) I decided to take it. We paid for the order and I came across other multicooker. I thought, why not buy another cartoon in addition. Initially, I liked Polaris 0517, Redmond 90, Redmond 150 and Polaris 0531. I started to study the information and either I somehow misunderstood the information, or I don’t know what yet, but I all came across reviews that Redmond is better than Polaris. I believed it and chose the 150th model. I was very serious about it. Then my birthday came, they gave me money and here again the thought came to my mind, maybe it's worth studying the information about Polaris. And I finally decided that I didn't want to put up with the shortcomings of Redmond for such a lot of money. And since the model Polaris 0531 initially really liked me, I decided to choose it.
I read a few reviews, I realized that the model is good. There would be problems, they would have already been written about.And the recipes will suit any Polaris.
This is how I went to buy nesting dolls: girl_curtsey: The final decision to buy came to me on February 24th. I really hope that the weather will not deteriorate much and I will be able to pick up my beauty at the weekend (you need to go for her to the neighboring city in Eldorado).

well, how beautiful I am, I want that too uuuu

Not only is she beautiful, but she has a competently made multi-cook in terms of the temperature step

Very beautiful, straight Khokhloma to the masses !!! And at what price is it? I looked in the internet - it is not on sale.

[lisa567]

lisa567, in Eldorado it costs 5499

You can buy only in Eldorado, because this is a special order for this chain of stores. So the consultant in the store told me. For what I bought, for what I sell.
In reality, in home lighting, the color is dim, muted red on black. Although the photo looks clumsy. The surface is like varnish, and the drawing seems to glow. I usually do not like pictures, but here I like how it was done, and so far I have not bothered with the drawing.
The multi-cooker is the only one of its kind that has a very successful multi-cook-intervals and temperature range.
And also, unlike Redmond, with which many compare, it has two much-needed sensory programs: Krupa and Plov.
An additional ceramic bowl, which is sold in Eldorado (POLARIS PIP 0503K), does not reach the bottom of the heating element due to the low-positioned handles, so the handles will have to be unscrewed somehow. And I want to buy an additional Teflon bowl, no handles, from Redmond. Hope it fits.

I am also writing my comments, maybe someone will come in handy in choosing a multicooker.
There is a real time clock, it is convenient to set it for a delay. The sensors respond normally to touch. There is no third-party smell after boiling with lemon. The menu is clear and intuitive. No drip tray, moisture collects on the rim and is easily removed by blotting.
Mode Yogurt-milk is kept at a temperature of 39.5 degrees, that is, what is needed does not overheat.
Groats mode - even if you initially set the time with a margin, the multicooker will turn off as soon as the free liquid disappears.
Many multicooker has a drawback - the minimum program time is too long to turn it on again and finish cooking the dish. Sometimes it is necessary to continue the regime for 5-10 minutes. I have to guard and turn off the repeated mode myself, which would be terribly inconvenient for me. In this case, I use a multi-cooker, since the temperature of each mode is known and written in the instructions.

I have a question: what algorithm does the Oatmeal mode work according to, if it is declared as sensory?

"Oatmeal temp. 90-100 30 (15-60) Default time 30 minutes. Time adjustment: from 15 minutes to 1 hour, step 5 minutes. Temperature 90-100 ° С auto."

Congratulations on the new sweetheart!

Groats mode - even if you initially set the time with a margin, the multicooker will turn off as soon as the free liquid disappears

Did I understand correctly that the time in this mode is regulated, but the multicooker switches to heating when the bottom of the bowl overheats due to the boiling off of all the liquid? If so, it triggers the multicooker protection mechanism from overheating. This is not found in all multicooker, but it is very convenient. I really like this in the Quenching mode, but among my multicooker this is only in the cheap Cromax, for which I really love it.

I have a question: what algorithm does the Oatmeal mode work according to, if it is declared as sensory?

"Oatmeal temp. 90-100 30 (15-60) Default time 30 minutes. Time adjustment: from 15 minutes to 1 hour, step 5 minutes. Temperature 90-100 ° С auto."

Well, how can the mode be touch-sensitive if the cooking time is regulated? Apparently, for this mode, a shutdown mechanism is also installed when overheating (some maximum temperature for the mode at which the multicooker turns off or switches to heating)

Congratulations on the new sweetheart! : rose: Did I understand correctly that the time in this mode is regulated, but the multicooker switches to heating when the bottom of the bowl overheats due to the boiling off of all the liquid? If so, it triggers the multicooker protection mechanism from overheating. This is not found in all multicooker, but it is very convenient.

Thanks for the compliments!

I cooked buckwheat and deliberately set the time longer than necessary. Time immediately starts counting back. It was originally set at 1 hour. The heating did not turn off in advance. Cold water, cereals are about a third of the standard package. There were 18 minutes before the end of the cycle, as the multicooker switched to heating. I checked the porridge: there is no free water, the cereal is crumbly, but soft, cooked.
So, yes, the Groats mode works on the principle of the so-called touch mode, turning off when there is no liquid. The temperature begins to exceed 100 degrees. (it is not clear what the temperature limit is 135 degrees?), the multicooker turns off.
I will assume that if you set the time less than that required for the disappearance of free water, then the mode will work for all the specified time and turn off, and the liquid may remain.

That is, the Groats mode works according to the set time, but in case of liquid disappearance it will turn off earlier as soon as the sensor detects an increase in temperature.

Well, how can the mode be touch-sensitive if the cooking time is regulated? Apparently, for this mode, a shutdown mechanism is also installed when overheating (some maximum temperature for the mode at which the multicooker turns off or switches to heating)

Here I myself think how ... Hands will reach the oatmeal on the water, I will take measurements.
But maybe who has already cooked this porridge?

This is not touch mode. In this case, in my Cromax, almost all modes are sensory. This protects the bowl from overheating, as in the "Quenching" mode in a number of multicooker. But this, of course, is very convenient, I agree. I miss this in my other multicooker.

This is not touch mode. In this case, in my Cromax, almost all modes are sensory. This protects the bowl from overheating, as in the "Quenching" mode in a number of multicooker. But this, of course, is very convenient, I agree. I miss this in my other multicooker.

And what is the algorithm for the touch mode?

The time for the mode is not set. The liquid boils away. The countdown begins. Usually 5-10 minutes. The groats are dried, the bottom is fried. Most often, the algorithm is just like this.

Beauty! As far as I understand, from the new she has a small step on a multi-cooker and the cancellation of heating? Is this the point of a decently increased price? Compare with 0517 HELL. IMHO 2 degrees on a multi-cook the range is too small. You get tired of poking your finger while you type in the necessary. But the cancellation of heating - weigh! Although, they say, 0517 in the latest models is somehow canceled ... I repeat, these are just reflections on the increased price ...

The time for the mode is not set. The liquid boils away. The countdown begins. Usually 5-10 minutes. The groats are dried, the bottom is fried. Most often, the algorithm is just like this.

I got it, this is how it happens on the Krupa 1-3 mode in the Brand 701, for example.

In this multicooker, it is not clear whether the heating intensity changes when passing through 100 degrees. (i.e. when the liquid has already boiled away), but there is some time between 100 deg. and 135 degrees, until the multicooker turns off. At this time, the cereals are dried. Similarly, in the Plov mode when passing through 100 degrees. and up to 150 degrees. the groats are dried, maybe fried. But this length of time is not defined as defined in touch mode.

Beauty! As far as I understand, from the new she has a small step on a multi-cooker and the cancellation of heating? Is this the point of a decently increased price? Compare with 0517 HELL. IMHO 2 degrees on a multi-cook the range is too small. You get tired of poking your finger while you type in the necessary. But the cancellation of heating - weigh! Although, they say, 0517 is somehow canceled in the latest models ... I repeat, these are just reflections on the increased price ...

The price was 7 thousand, now 5500.I bought for 5500r in the store itself (not through an order in the online store), I was also given a coupon for the next purchase for 1500r. This is such an action now.
0517th in October 2012 started at 7000r, then the price was kept at 5400r.
The finger does not get tired.

Step 5 ° C (in the range from 30 to 90 ° C), 2 ° C (in the range from 90 to 110 ° C) 10 ° C (in the temperature range from 110 to 160 ° C).

The difference is that Multipovar starts from 30 deg. There is a built-in clock. A trifle, but convenient.
Multipovar Plus at 0531, Multipovar at 0517.

Here are the new changes in 0517. Post 2081:
https://Mcooker-enn.tomathouse.com/in...119.0

You can compare 0531 and 0517. Then decide which multicooker to give the money for.

Milk porridge mode. Check on classic oatmeal, 600 ml of milk, 400 ml of boiled water, salt. The temperature is constant, 94.5-95.5 degrees, the liquid is covered with small bubbles.

A remarkable result is a deviation of only a degree. And the proportion is 1: 6? Judging by the temperature, you can try and cook it purely in milk (for those who love such porridge).

Yes, the proportion of groats is liquid as 1 to 6. I make it quite liquid, because the porridge then infuses all night.
I think that at such a constant temperature, you can cook any running porridge in undiluted milk. Just take into account that the liquid does not boil. For example, I use UHT milk and boiled water.

: :) Offtopic: I wanted to add this cartoon to my profile, but there are no recent Polaris in the choice of models ... (

They ask for it HERE

Thank you, I went to ask.

I also chose this multicooker from the considerations that if the manufacturer promises to withstand the temperature in increments of 2 degrees, it means that technically the multicooker is ready to give a small error in maintaining the temperature in different modes. So far, expectations are met.

I read user complaints about a dead battery at 0531, the time set is behind. Girls, does anyone have such problems?

I have. Time is not lagging behind. When turned on, the clock shows "00:00", although before that the current time was set. Only if I turn it on literally after 1-3 minutes, the current time is displayed.

It would be better if this time did not exist at all, I have no problems with the pressure cooker

Changed today, now the release date is December 2013.

The price was 7 thousand, now 5500. I bought for 5500r in the store itself (not through an order in the online store), they also gave me a coupon for the next purchase for 1500r. This is such an action now.

Give me pills for greed and more, more!
I came to change the 0531st multicooker, and bought another 0517th. It cost me 2099 rubles, because I used a coupon for 1500 rubles, the price in the store is 3599 rubles, which is cheaper than on the website of the online store. That is, I paid 7600re for these two multicooker. And I chose 0517th so that the release date was no earlier than October 2013, there was a December version, which means the latest version.
Now I have three multicooker: Brand 701 (3 liters), 0517, 0531 ... One will go to the dacha, which one? It's all a pity, everyone is needed

An additional ceramic bowl, which is sold in Eldorado (POLARIS PIP 0503K), does not reach the bottom of the heating element due to the low-positioned handles, so the handles will have to be unscrewed somehow. And I want to buy an additional Teflon bowl, no handles, from Redmond. Hope it fits.

I tried on this cup again today. Now I doubt the handles are in the way. It seems like they do not rest on their lower part.
Correcting myself:
Today I cooked in a bowl from 0517 (PIP 0503K) in the 0531st multicooker, everything is fine. But, on the contrary, the bowl from 0531 does not fit 0517, but only because of the handles.

I exchanged the multicooker (0531). now the release date is December 2013. Thought everything was fine now. With the clock again, misunderstandings. When turned on after the night, the clock showed the off time plus forty minutes. FSE, I scored on the clock, it shows the correct time while they are connected to the network. The clock is needed to delay, they perform this function.

Now I am running 0517 (latest version) and 0531.
My 0517 differs from the 0527 only in the absence of several programs and Multipovara Plus, but the control principle and temperature range are the same. It is very convenient to adjust the time "on the fly" for all programs.

It’s strange that the clock is like that. At 0523 everything shows correctly, does not go astray. But the processors are probably the same.

[Zinfandel]

ZinfandelPlease tell me how you like the bowl, nothing sticks. I twisted it in the store today, its corrugated bottom is embarrassing. But the beauty can't take her eyes off, because I understand that the seventh slow cooker is too much, but I really want to.

[Zinfandel]

ZinfandelPlease tell me how you like the bowl, nothing sticks.

The bowl is ceramic coated, so I don't have long-term hopes for it. But the bowl is of high quality, today I cooked pilaf, fried zirvak. Everything is going great. But I’m doing it wrong. I'll buy Teflon, I'll only fry in it.

The weight of the bowl is 630 g, for comparison, the weight of the gray smooth bowl is from 0517 (PIP 0503K) 605 g.

I like the button controls. It is convenient to adjust the temperature and time back and forth with two corresponding buttons.

[Zinfandel]

Zinfandel, the girls really wanted to compare 0531 and 0517. Can you make a small reviewer using these models?

The quality of the photo is not very good, I shoot with an iPad, there is not enough lighting. I'll try to insert a photo.

[Zinfandel]

Zinfandel, and according to the modes there then during the operation of both multicooker comparative reviewers are possible, eh?

The photos show the size, the multicooker is close to the wall. The width of my slab is 60 cm.

A bowl with honeycomb shaped like rice. (0531)

[Zinfandel]

Zinfandel, and according to the modes there then during the operation of both multicooker comparative reviewers are possible, eh?

I will write my observations in comparison, while these toys are very short for me.
If we formally look at the difference in modes, then 0531 added:
Frying in oil
Dumplings (interval from 5 to 45 minutes, and a similar mode Pasta in 0517 from 8 to 20 minutes, and there is also pasta in 0531),
Aspic (here the division of the Stewing mode into two: Aspic and Stewing);
Bread.

Some side notes:
the signal at 0531 is much louder, say, shrill;
the lid of 0531 is less easily soiled, fingerprints are practically invisible on the ornament, and on the silvery lid 0517 you can do fingerprinting;
a special hole is made in the removable inner cover 0531 (the one with an elastic band), this hole so that the upper sensor in the cover is not covered with another layer of metal.



There is no such special hole in 0517.

[Zinfandel]

Zinfandel, assistants are good. I wish you only positive emotions from communicating with them.

[Zinfandel]

Zinfandel, assistants are good. I wish you only positive emotions from communicating with them.

Thank you so much!
And to everyone who sent congratulations on the new thing, thank you!

Today I made pilaf at 0531. The pan turned off by itself, because I set a lot of time. The result is correct, the meat is a little fried, the rice is sticky, but crumbly.

It’s strange that the clock is like that. At 0523 everything shows correctly, does not go astray. But the processors are probably the same.

I don’t know how to understand. In the first case, the clock was reset to zero after turning it on, but now the clock works for some time after turning it off, then it is fixed. I won't take it to the store, because it is impossible to check this error in the store conditions.

Outwardly, 31 and 17 are somewhat similar. Display ... with the lower steel edging ... Well, in theory, the modes are similar, but the difference in them is not fundamental ... I wonder how it will be in practice

a special hole is made in the removable inner cover 0531 (the one with an elastic band), this hole so that the upper sensor in the cover is not covered with another layer of metal.
There is no such special hole in 0517.

How not? It is also present in the removable lid of the 0517th Poli. (Look at least here:
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=177119.0)

[Manna]

Manna
Yes, the material and color are the same, they seem to be similar, but when the multicooker stands next to each other, 0517 still looks like a little shy girl. The 31st is smart and looks good on its own when alone. I keep the 17th next to Brand 6060, here, of course, the cartoon looks good.

... I wonder how in practice it will be

I'm curious myself, especially hot.

How not? It is also present in the removable lid of the 0517 Poli.

I have such an inner cover, without a hole. Apparently, different parties differ.