venera19
ShlypaI can't help you with this yet, I'm not very experienced in this matter, I haven't figured it out myself yet. I read the topic about nozzles on this forum, I figure out what I would like.
But I think more experienced users of Kesha will help solve incomprehensible questions.
Shlypa
Thanks, I will read. And if you buy a sieve, will it fit on 0960 or do you need to buy an additional adapter?
And another question, on a cube, is it really big?
Aaaaaaa 🙃
VRad
Shlypa, sieve, the one with a plastic rim fits perfectly. Without any adapter. An adapter is only needed for a low-speed socket. I use the last induction.
And as for the cube - it seemed to me very small. That is, smaller than I cut with a knife.
LudMila
Quote: VRad
And the sieve can still be found. Look at Mvideo.
It is possible, but theoretically it is for a 4.6 liter bowl (the pin is less thick than other attachments for large machines). However, girls use this sieve even in large bowls, the pin comes in quite tightly, although the diameter is smaller than necessary. I've also bought ...))
Shlypa
Thank you very much for your answers 💐, I went to read, my husband said to give a clear list of nozzles.
bangs
Quote: Shlypa
And another question, on a cube, is it really big?

Shlypa, I read Temki, wrote out reviews for myself in the "synopsis", so it might come in handy.
"nozzle cubes"

"for the 400th attachment to the Kenwood CM, the size of the cube is slightly less than 10 mm (for the thickness of the blade).
If you cut raw vegetables, and then boil, then the result, depending on the specific product, will be 8-9mm.
THE CUBE AS FOR ME IS SO AND NOT LARGE. ME PERSONALLY AND HUSBAND AT THE MOST TIME. I CUT VEGETABLES RAW AND STEAM IN THE STEAMER.
SO MORE NRA. MADE IN COARSE PEAS SIZE. EVERYTHING IS PRACTICALLY THE SAME SIZE
And I make a vinaigrette with a cube. I also skip raw vegetables into a double boiler in a micra. very fast and convenient
By the way, finished cubes are less in volume "

Shlypa
How interesting, that is, first we cut raw vegetables, and then boil. Thank you.
balabolka
And I will insert my "three kopecks")) I really like to cook condensed milk and all sorts of sauces with meat in induction. I use kesha instead of a frying pan. Just yesterday I took out the remains of buckwheat, poured it with an egg and threw the minced meat there, turned on induction, stirring and that's it - dinner is ready! And in it she has kneaded everything for the connoisseurs - beauty. And in the mini-chopper I often make mayonnaise and garlic sauce based on it.
VRad
balabolka, and about mayonnaise in the grinder can be more detailed? I tried it once, it didn't work out and dropped it. Do you want
NatalyaB
Quote: VRad
balabolka, and about mayonnaise in the grinder can be more detailed? I tried it once, it didn't work out and dropped it. Do you want
I didn't succeed either. But I can't do it with a hand blender either. Hand mixer or whisk only. I'm not upset, but it would be interesting.
And in mini-grinders excellent different sauces "a la pesto" are made.
balabolka
VRad, break 1 egg, half a teaspoon of sugar, half a teaspoon of salt, a teaspoon of mustard, a tablespoon of vinegar (I take wine or apple cider) and add sunflower oil to the max mark (you can even add a couple of millimeters higher) into the chopper. Install the chopper and on pulse mode, for 8 seconds, scroll 4 times. Honestly, it gets lost already during the first approach. The rest are control, to calm the conscience)). I add a clove of garlic, chopped into three parts, and a little dill, before beating. It turns out garlic sauce)). An interesting observation: if you make a jar of mayonnaise and immediately try to make a second batch with an unwashed knife, the sauce will not thicken. Why - I don't know, but it is.So we only make mayonnaise and sauces based on it with a clean knife! There is a way out of the situation - if the mayonnaise is not whipped, put it in the refrigerator for several hours (I usually leave it overnight) and then whisk it again. This way I successfully reanimated) That's it.
VRad
balabolka, thanks, I'll try.
yana0505
Girls, sorry, there is no time to read, who can, then post the link where we are buying induction now, is there still 096 on sale, maybe what shares are there, who knows.
Marinuly
yana0505, Only here

🔗

yana0505
Marinuly, Thank you so much
belena74
Quote: Shlypa

On the official website, the list of nozzles does not include some that are of interest to me, for example, a sieve-rub, an ice cream maker. Are they for this model?
Shlypa,
I also have Kesha 0904 and I rushed about in search of an ice cream maker, and even ordered this attachment along with the machine, but at the last moment, right before delivery, the manager phoned and said to refuse, because the ice cream maker on sale on the website would not fit the new induction ... In short, they are not yet available (. And yesterday I was at MK from the Cookingshef website and they were preparing ice cream on a new induction, and so they also do not have a suitable ice cream maker. Apparently, they used 957 AT or KAV, but they pressed Kesha's head with our hands for 15 minutes while the spatula was spinning in the bowl of ice cream ...

Quote: venera19

But suddenly I caught fire with homemade ham, bought a ham maker for 600 rubles, the usual Vetta. And now I am spoiling my family with homemade ham. Bowl 6.7 and induction were very useful in this matter.

Venera19, I'm also staring at this Vetta). Can you tell us how induction helps you with ham? Are you replacing a multicooker with it? I apologize if the question is stupid, but I'm not yet fully on the topic of ham)))
Shlypa
Belena, thanks for the info.





Tell me more, is the meat grinder attachment worthy of attention, or is it better to buy a separate unit?
Ketsal
Shlypa, I had an excellent meat grinder for Kesha. The only thing in it there is no reverse button. I did not notice any differences from the stand-alone one. The bonus is that the attachment takes up less space. Nothing is wound around the knives, the meat does not freeze beforehand.
Conclusion: if there is none, then take it, if there is a separate one, then there is no point in the nozzle
Shlypa
Just my meat grinder was given to my mother, and now I have none.
Miranda
Quote: Shlypa
Is it possible to cook custard, custard dough for eclairs on induction, make béchamel sauce, cook caramel, condensed milk. Are you actively using induction or not?
I use induction very actively.
If possible, induction is a good choice.

Do not rush with attachments, here everyone wants the entire collection at first, and over time they realize that everything is not needed. You can slowly read the topic of nozzles, and decide whether or not.

And so, the girls have already written a lot, I don't know what to add. I really love my induction, I don't even remember how I lived without it, although only almost 2 years. The fact that I began to do a lot of what seemed inaccessible or difficult to me is 1000%
Olga VB
Quote: Shlypa
husband said to give a clear list of nozzles
Monkey labor!
several times both I and others have written here that until you work on the machine yourself, you will not understand what is really needed and what will be lying around.
Here you must first proceed from the fact that you cook regularly even without a car, and then gradually buy something that will expand your horizons.
That is, analyze what you do regularly, that only during the harvesting season, which you rarely do just because it is difficult and time-consuming to do it manually. From here the first list will appear.
Analyze it and decide exactly.
Well, and then slowly everything else.
Our themes will help you a lot with this - be sure to look through.
And tell your husband not to fuss from the doorway, because for some time his headache will completely disappear on the topic of what to give for DR, NG, wedding anniversary, 8M, etc.
And if you stay on our forum, then this headache will disappear forever.
But another will appear: where to get money for all home wishes, and which one to implement earlier.
Personally, in our family now, not only on women's holidays, but also on men's holidays, it is the home theme that prevails.
For example, at NG2018, my husband ordered himself a submerged pancake maker as a gift
So please your spouse with the new perspectives. Or scare
Good luck!
Shlypa
There is such that you want all the nozzles at once. I have already understood that it is necessary to take induction, and I need to be determined faster until my husband cools down ☺




May I ask you, do the disks on a food processor look like a vegetable cutter attachment? Or is it better that both are used for different functions?
Ketsal
Shlypa, differs in my opinion only one disc-very fine grated puree. I have two attachments. Salad for every day, make meat emulsion, shortbread dough - processor. But only high-speed sauerkraut. And for other workpieces, too, the high-speed one is more convenient
Shlypa
Thank you, I understand slowly, I read the topic about attachments
night_furia
Shlypa, the discs of the combine and the high-speed one differ. Discs for potato pancakes and a super fine grater, disks for julienne, the shredder is also visually different in size, and no matter how much I looked, I could not understand 2 discs differ in size or all 4.
In the topic about attachments, in my opinion, on page 10-11, there is a detailed description with photographs of both attachments with all disks. I initially chose between them, chose a harvester, but then I bought a high-speed one for a promotion. I only regret that I did not choose both nozzles as a gift for my car, it would be cheaper in the end all my Wishlist-nozzles would cost.
Shlypa
I have already decided that I will take both 😄😄😄, my husband loves potato pancakes.
Sweet
Quote: night_furia
Sweetheart, I took my Keshik to Mvideo for a promotion, and then I issued a certificate on the Kenwood website, so to speak, for peace of mind.
Margot, I was told that the entire service is through the store, even after 2 years. But I think it's not important, because Kenwood himself gives a 5-year guarantee, so if you directly contact the service center, it will be the same, especially since there are certificates. I hope we don't need this!

Quote: VRad
Everything can be done. And custard and béchamel and much, much more. You will forget about standing over a saucepan on the stove. The 6.7 bowl does not take up much more space, but it offers great opportunities.
Well, now this is my next dream)))
Olga VB
Quote: Sweet
the whole service through the store, even after 2 years.
For such an "additional" service, the store, as a rule, takes additional money, and this is a complete mess, since Kenwood itself gives a 5-year warranty on these CMs. So the store is just trying to cash in on repairing the failure.
Sweet
Olga VBThey wind up additional money, it was clear from the beginning - I looked through the entire Internet using this model. But I always try to take the equipment from the official representatives whom the manufacturer recommends, I feel so calmer)).
Mashanek
Good evening! Please tell me if the Cooking Chef KCC 9060S kitchen machine has a delayed start function, so that you can cook, for example, porridge at a certain time, like in a multicooker. Sorry for the weird question. I am faced with a choice: Chef Titanium plus a new multicooker or cooking KCC 9060S. A slow cooker is needed only for cereals and pilaf. Therefore, if the delayed start function is in the induction, doubts will disappear. The Kenwood technique has never existed. I use Thermomix, but now I decided to buy at first just a planetary mixer, and then my “appetite” grew up to induction with nozzles.
Miranda
Mashanek, there is no delayed start.
Kenwood induction and multicooker are different things, with different functions. Some are the same, yes, but not all. One cannot replace the other.

Such stewing or pilaf, etc., as in a multicooker in Kenwood will never work. And in a slow cooker, you will never do something that requires stirring, no custard or cream, etc.
Mashanek
Miranda, thanks. I thought so, just confused by the phrase on the manufacturer's website about the delayed start. What is a kitchen machine that cuts, mixes, whips, and also weighs, boils, chops ice, makes jam and so on, I have a little idea. I have had Thermomix for six years. But the functions of whipping the same proteins are not very good there. Although the dough he makes is relatively not bad, for my needs.I really want to buy something new, namely Kenwood, but I can't decide: Titanium on the official website. plus 3 nozzles as a gift or induction 9060S as a gift delivery to the region and buy several nozzles. I need a meat grinder for pasta.
Miranda
Quote: Mashanek
I thought so, just confused by the phrase on the manufacturer's website about the delayed start.

What is the phrase? For the first time I just hear and have never seen.
Mashanek
Miranda, I don’t know how to insert a link, but the official. the website in the review of this machine says: "... the buttons on the display regulate the temperature, operating time, delayed start timer, stirring modes and power." Perhaps there was something else here, I read it literally.
Miranda
Mashanek, but indeed, it is written
I can't even imagine what they meant there.
venera19
Quote: belena74
I'm also staring at this Vetta). Can you tell us how induction helps you with ham? Are you replacing a multicooker with it? I apologize if the question is stupid, but I'm not yet fully on the topic of ham)))

belena74, I just don't have a multicooker. And in general there was no such device that would keep the temperature of 80 degrees.
And now there is!
Vetta bought quite recently, there were discounts in Ozone, for only 570 rubles. I looked, of course, at Teskiy, but decided that 2.5 thousand rubles were expensive for me, suddenly I wouldn't like making ham.
Shlypa
My Kesha has arrived !!! The husband barely entered the door with a box 👀. Something is scary to me 😳
LydiaVera
Shlypa, Congratulations! Now you will have a new life!
Shlypa
I will probably study the instructions for a week. I will appear with you with newbie questions 🙃
Irinabr
Shlypa, a lot of videos on YouTube. Take a look there. So much faster you will understand what's what!
The acquisition is gorgeous. Good luck!
Miranda
Shlypa, Congratulations
The joy of unpacking such a huge box, and then from acquaintance - I envy
Molli
Girls and boys, tell me which nozzle for the food processor is better to chop zucchini and eggplant for frying?
Ketsal
Molli, slice thick is a disc with a single slot or a large julienne
leostrog
I wrote here a month ago that I gave my Kenwood for repair (Kenwood Major premium KMM 710). For a very long time they could not find a spare part (it was not in the Kenwood service center).

This is what the part that was replaced looks like.

Kenwood Kitchen Machines
As the master explained, this cogwheel transmits movement from the motor to the mechanical part. More expensive models have several of these wheels and they are metal, but changing them, accordingly, costs 2.5 times more. Plus, they also replaced the drive belt.
But after the repair, the harvester began to knock more and the upper part still wobbles during kneading (I made a soft dough from 500 g of wheat flour). tomorrow I'll take the master again. And I really wanted to buy a low speed vegetable cutting attachment. But now I'm afraid - how will it fall apart?
Olga VB
Interesting story.
The wheel does not look badly damaged, in fact it is in working order
Quote: leostrog
Plus, they also replaced the drive belt.
leostrog, and not razvodilovo all this repair?
leostrog
No, I have known this master for 20 years. and repaired many of his devices - Philips, Braun, Breville.
And there in the center of this wheel there is also an axle - that's why it broke.
I am sinning for another thing - that they are bringing us here third-rate Kenwoods.
Marinuly
Quote: leostrog
I am sinning for another thing - that they are bringing us here third-rate Kenwoods.
I thought that all third-rate equipment was being brought to Russia, but it turns out to be to you too.
Miranda
I recently came across a video on YouTube, although it is in Arabic, but descriptive. There, a person turns on the car, something is wrong with the sound, and then he completely disassembles it, shows what the problem is, repairs it, puts it back together.

About the sound. On brand new cars or after repairs, it is louder than on old ones, because parts, lubricants, etc., rub in.



Quote: leostrog
But after the repair, the harvester began to knock more and the upper part still wobbles during mixing
You wish you could shoot a video, eh?
The machine should nod when kneading, it can nod strongly from the dough and even stagger. From the words it is very difficult to understand what exactly you mean by these words, what is the problem.
leostrog
Miranda ... thanks for the explanation. I'll try to make a video.
I will try to make a couple more batches and if the knocking does not disappear, I will take it back for repair.
Can you send me a video link in Arabic?
I can ask my colleagues to translate the meaning.
Miranda
leostrog, video under the spoiler in my post.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers