once
Blender Kitfort KT-1352 Shake & Take


Blender KT-1352 Shake & Take (shake and take) is designed for chopping, mixing, whipping, homogenizing, kneading batter, mixing cocktails, ice picking, making smoothies, protein mixtures and baby food.

The blender body is made of stainless steel and plastic. The advantages of the blender are modern style and ease of use. At high power, the device is compact, equipped with a stainless steel multi-blade knife and a bottle with a lid.

After mixing, there is no need to pour the contents: the bottle can be closed with a screw cap, after which it turns into a convenient container for storing and carrying the prepared mixture. You can put the bottle in the refrigerator or take it with you to the gym. The bottle fits into the car's cup holder. The bottle cap has a drinking hole that can be closed with a cap.

For safety reasons, the blender can only be operated with the bottle installed. The blender also has an overheating protection system.

The rubber feet secure the blender firmly to the table, and the bottle cap snaps to the bottom so it is always close at hand.

Kitfort KT-1352 Shake & Take. Compact blender

Technical characteristics of the blender Kitfort KT-1352

Voltage: 220-240 V, 50/60 Hz
Power: 350W
Electric shock protection: class II
Bottle capacity: 0.6 l
Size with bottle installed: 115 x 140 x 405mm
Packing size: 220 x 160 x 250mm
Cord length: 1.19 m
Net weight: 1.2kg
Gross weight: 1.4kg

Kitfort KT-1352 blender complete set

1. Engine compartment - 1 pc.
2. Knife block - 1 pc.
3. Bottle - 1 pc.
4. Cover - 1 pc.
5. Operation manual - 1 pc.
6. Warranty card - 1 pc.
Kitfort KT-1352 Shake & Take. Compact blender

Blender device Kitfort KT-1352

Kitfort KT-1352 Shake & Take. Compact blender

Description of the blender Kitfort KT-1352

Kitfort KT-1352 Shake & Take. Compact blender

Preparation for work and use

Wash bottle, cap and knife block before first use. Wipe the motor unit with a damp cloth.
Inclusion and use

Unscrew the knife block and place the ingredients in the bottle.
Screw on the knife block, turn the bottle over and place it on the blender with the knife block facing down, with the triangular mark on the knife block aligned with the mark on the motor block.
Connect the motor unit to the power supply.

To turn on the motor, press the start button on the motor unit. Release the button to turn off the motor.

When finished, remove the bottle from the motor unit and unplug the blender from the power supply.

Turn the bottle over, unscrew the knife block and pour the contents into your container.

You can use the bottle as a storage container, to do this, after detaching the knife block, close the bottle with a lid.

Kitfort KT-1352 Shake & Take. Compact blender

Advice

Do not keep the blender on for more than 3 minutes to avoid overheating the motor. After 3 minutes of operation, the motor must be allowed to cool down for at least 3 minutes.

Do not put ingredients in the bottle that could damage the blender: bones, large chunks of hard foods, foods that are too hard, etc.

Do not overfill the bottle, there should be free space in it. Do not fill the bottle above the maximum level of 600 ml. If ingredients form a lot of foam during mixing, reduce the amount.

Do not fill the bottle with liquid with a temperature higher than 60 ° C, otherwise the bottle may deteriorate.

Cut large ingredients into pieces no larger than 1.5 x 1.5 x 1.5 cm.

It is better to add some liquid to facilitate mixing and grinding of ingredients.If the recipe requires ingredients to be mixed with liquid, it is recommended that you add it to the bottle along with it.

For optimal chopping, we recommend placing the ingredients in the following order: liquid, fresh (unfrozen) food, frozen fruits and berries, yogurt or ice cream.

When grinding solid ingredients, it is better to add liquid to them gradually in small portions.

Hold the bottle and the motor unit with your hands while picking ice. Do not use more than 350 g of ice. Do not use large blocks of ice as this may damage the blender.

It is not recommended to mix ingredients with a volume of less than 0.2 liters.

Do not turn on the blender with an empty bottle.

You can use the bottle as a drink container to take with you. The bottle lid is equipped with a drinking opening closed by a cap. The bottle fits into a standard car cup holder.

The blender has a motor overheating protection system. In an overload operation, the fuse will trip and the motor will shut off. Let the appliance cool down and continue mixing after about 15 minutes.

Maintenance, care and storage



Be sure to unplug the blender before servicing. Wash bottle and knife block immediately after use. Do not allow food debris inside the bottle to dry.

To remove food residues from the bottle, pour some water and detergent into it, place the bottle on the blender and turn it on for a few seconds. Then rinse the bottle and knife block with water.

The bottle, lid and knife block can be washed in a dishwasher up to 60 ° C.

Do not use aggressive detergents and abrasive materials for washing. Wipe the blades dry after washing.

Be careful when washing the blades, do not get hurt, the blades are very sharp. Wipe the motor unit with a damp and then dry cloth. Do not immerse the motor unit in water or other liquids. If water gets into the motor unit, dry it thoroughly before turning it on.

Store your blender in a cool, dry place out of the reach of children.



Precautions

Please read the instruction manual carefully. Pay special attention to safety precautions. Always keep the instructions handy.

1. Use the blender only for its intended purpose and in accordance with the directions in this manual.

2. The device is intended for indoor use.

3. Before connecting the device to an electrical outlet, make sure that the power ratings indicated on the device match those of the power source being used.

4. To prevent electric shock, do not immerse the device in water or other liquids.

5. Do not carry the blender by the power cord. Do not pull on the power cord when disconnecting the plug from the outlet.

6. Do not use the appliance if the power cord, plug, or other parts of the blender are damaged. To avoid electric shock, do not disassemble the device yourself - contact a qualified technician to repair it. Remember, improper assembly of the device increases the risk of electric shock during operation.

7. Children, people with reduced physical, sensory or mental capabilities, as well as people who do not have sufficient knowledge and experience, are allowed to use the blender only under the supervision of a person responsible for their safety, or after instructions on how to use the device. Do not let children play with the blender.

8. Monitor the blender when children and pets are around.

9. Do not turn on the blender with an empty bottle. This could damage the device.

10. Do not leave a running blender unattended. Turn it off and unplug it when not using the device for a long time or before performing maintenance.

11. The blades are sharp. Don't cut yourself.

12. Before replacing accessories or additional parts that move during operation, turn off the device and disconnect it from the power supply. After turning off, wait until the knife has come to a complete stop.

13. Place the blender only on a stable, horizontal surface at least 10 cm from the wall and edge of the table.

14. Do not try to bypass the power-on lock.

15. Do not drop the blender or subject it to shock.

16. Keep the device out of the reach of children.

17. Use only manufacturer-supplied accessories. Use of other optional accessories may damage the device or cause injury.



All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers