once

Vacuum blender Kitfort KT-1355



Vacuum blender Kitfort KT-1355 mixes products, having previously evacuated residual air from the bowl. During vacuum mixing, useful substances are retained in the products, which will be destroyed as a result of the oxidation reaction in a conventional blender. When mixed with air, color is also lost, the product stratifies into fractions. In a vacuum blender, the product retains its freshness and aroma from several hours to a day. In addition, the vacuum facilitates the mixing process, since during the grinding process the products try to equalize the internal pressure with the vacuum in the bowl, throwing out the remaining air from themselves. As a result, the fibers of the pulp and fiber mix more efficiently.

The blender is equipped with a glass bowl with a measuring scale of 1.6 liters. The body of the device is made of a combination of stainless steel and plastic.

The blender has automatic and manual modes. In automatic mode, the appliance evacuates air, then mixes the ingredients, changing speeds for efficient chopping. In manual mode, two mixing speeds and a pulse are available. The required operating mode is selected by buttons and a regulator on the device body. Rubber feet provide a firm hold on the blender on the table.

For safety reasons, the blender can only be operated with the bowl installed and the blender lid tightly closed. If the cover is not closed tightly, the motor will not start. The blender also has an overheating protection system.

The device is designed for making puree and baby food, smoothies, mixing cocktails, whipping, chopping, mixing various products, and breaking ice.

Kitfort KT-1355 - vacuum blender

Specifications of the blender Kitfort KT-1355



1. Voltage: 220-240 V, 50/60 Hz
2. Power: 600W
3. Class of protection against electric shock: II
4. Number of speeds: 2 + pulse mode
5. Working volume of blender bowl: 1.6 l
6. Blender bowl material: glass
7. Blade material: stainless steel
8. Body material: stainless steel, plastic
9. Cord length: 1.2m
10. Device size: 185 * 223 x 415mm
11. Packing size: 454 x 249 x 280 mm
12. Net weight: 4.2kg
13.Gross weight: 4.8KG
Service life: 2 years Warranty period: 1 year Product certified

Kitfort KT-1355 - vacuum blender

Blender device Kitfort KT-1355



Kitfort KT-1355 - vacuum blender

Kitfort KT-1355 - vacuum blender

Modes:
Pulse - pulse mode
O - off
1 - minimum speed
2 - maximum speed of work
In pulse mode, the blender works as long as you hold the handle. When released, it will automatically return to the O (off) position.
The rotation speed of the blades in pulse mode corresponds to the maximum speed.

Description of the blender Kitfort KT-1355



Preparation for work and use
Before first use or after long-term storage, wash and dry all parts of the appliance except the motor unit.
Before starting work, open the lid and put the ingredients in the bowl.
Place the lid on the bowl tightly. The tab on the lid should cover the spout on the bowl. Make sure the valve fits snugly into the hole in the bonnet.
Place the bowl on the motor block so that the tabs on the base of the bowl fit into the grooves on the motor block.

Kitfort KT-1355 - vacuum blender

Place the lid on the blender and press down firmly, otherwise the motor will not start.

Connect the power cord to a standard outlet and turn on the device with the power key.

Manual mode

Click on the "Vacuum" button. The vacuum pump will begin to pump out air, the indicator of the button will turn blue. The air will be pumped out for about 15 seconds, then the indicator will turn off and the motor will automatically stop running.

Note... If the blender lid is not closed securely, the pump will automatically stop working after 2 minutes. For forced stop, press the "Vacuum" or "Auto" button.

Turn the knob to the desired mode. The blender will start mixing. When finished, turn the regulator to the "O" position, unplug the blender from the mains and wait until the blades come to a complete stop.

Press the depressurization button and open the blender lid.

Kitfort KT-1355 - vacuum blender

Remove the bowl. Before opening the lid, blow air into the bowl. To do this, slightly open the valve on the blender lid by pulling on the handle on the valve.

Kitfort KT-1355 - vacuum blender

Then open the lid and pour the ingredients.

Note. Once you have completely removed the valve from the cover, it can be easily replaced. To do this, unscrew the valve protection cap from the inside of the cover, insert the valve into the cover, then pick up the valve from the underside of the cover with your fingers and reinstall it.

Auto mode

Click on the "Auto" button. The button light will turn blue and the blender will start working. The vacuum pump will first pump air out of the bowl for about 15 seconds, then the mixing program will start.
The blender will automatically stop working after 2 minutes. For forced stop, press the "Vacuum" or "Auto" button.

When finished, unplug the blender and wait until the blades come to a complete stop.

Press the depressurization button and open the blender lid. Remove the bowl. Before opening the lid, blow air into the bowl. To do this, slightly open the valve on the blender lid by pulling on the handle on the valve. Then open the lid and pour the ingredients.

Kitfort KT-1355 - vacuum blender
Tips and Limitations

Do not exceed the maximum continuous running time of 2 minutes. Allow the blender to cool down for at least 10 minutes after 2 minutes of operation or after 10 consecutive starts.
Always turn off the blender before removing the bowl. Always wait until the blades have come to a complete stop after turning off the blender.

Do not turn on the appliance with an empty bowl.

Don't overfill the bowl. There should be free space in the bowl. Do not add ingredients above the maximum graduation level on the graduated scale. If ingredients generate a lot of foam during mixing, reduce the amount of ingredients.

Do not pour liquid over 80 ° C into the bowl.

It is better to add some liquid to facilitate mixing and grinding of ingredients. If the recipe requires ingredients to be mixed with liquid, it is recommended that you add it to the bowl along with it.

It is not recommended to mix ingredients of less than 0.4 l.

For mixing soft foods (eg watermelon, green vegetables, etc.), please use the minimum working speed. For hard foods (like carrots, green apples) use the maximum speed.

Use pulse mode when breaking ice. Turn on pulse mode for 1-2 seconds and turn off, take a break for 0.5-1 seconds. Continue the process until you reach the desired size reduction.

Do not use more than 100 g of ice. Do not use large blocks of ice as this may damage the appliance.
You can use a blender to vacuum food in a screw-top jar. To do this, put the food in the jar and screw the lid back on loosely. Then place the jar in the blender bowl and close the bowl with the lid.

Place the bowl in the blender, close it with the lid and press the "Vacuum" button.
After stopping the pump, press the depressurization button and open the blender lid. Remove the bowl. Before opening the lid, blow air into the bowl. To do this, slightly open the valve on the blender lid by pulling on the handle on the valve. Then open the lid, remove the can and turn the lid on the can until air is trapped in it.

Kitfort KT-1355 - vacuum blender

Recipes

Fruit cocktail
Peel 2 bananas and cut into pieces. Peel and core a medium-sized apple and cut into quarters. Put all the ingredients in a bowl, add 2 heaping tablespoons of frozen berries, the juice of 1 lemon and 0.5 liters of cold low-fat milk.
Place a bowl in a blender and turn on automatic mode. It is recommended to serve the cocktail immediately after preparation.

Cold pea soup
Place in a bowl 100 g canned or fresh peas, 150 g milk, a quarter of onions and a pinch of salt. Operate in automatic mode or manual mode at minimum speed.

Carrot juice
Cut 650 g carrots into 15 mm cubes. Place the carrots in a bowl and add 950 ml of water. Turn the blender on auto or manually cook on maximum speed for about 2 minutes. Carrots can be substituted with apples or pears.

Kitfort KT-1355 - vacuum blender

Maintenance, care and storage

Be sure to unplug the blender before servicing.
Wash the blender bowl immediately after use. Do not allow food debris inside the bowl to dry.
To remove food residues from the bowl, pour some water and detergent into it, place the bowl on the blender, cover it with a lid and turn on the pulse mode several times. Then rinse the bowl with water.
Bowl lid with seals, dishwasher safe up to 60 ° C. The blender bowl should not be washed in a dishwasher.
Do not use aggressive detergents and abrasive materials for washing. Wipe the blades dry after washing.
Be careful when washing the blades, do not get hurt, the blades are sharp.
Wipe the motor unit with a damp and then dry cloth. Do not immerse the motor unit in water or other liquids. If water gets into the motor unit, dry it thoroughly before turning it on.
Store your blender in a cool, dry place out of the reach of children.



Troubleshooting

Blender won't turn on

You didn't close the blender lid tightly

Cover the bowl tightly with the blender lid before turning on


No mains voltage

Check the mains voltage


It is not possible to create tightness, there is air leakage

You have not closed the blender bowl lid tightly

Close the bowl tightly with the lid. The tab on the lid should cover the spout on the bowl



Precautions

Please read the instruction manual carefully. Pay special attention to safety precautions. Always keep the instructions handy.
1. The device is intended for domestic use and can be used in apartments, country houses, hotel rooms, offices and other similar places for non-industrial and non-commercial use.
2. Use the device only for its intended purpose and in accordance with the directions set forth in this manual. Misuse of the device will be considered a violation of the terms of proper use.
3. Before connecting the device to an electrical outlet, make sure that the power ratings indicated on the device match those of the power source being used.
4. To prevent electric shock, do not immerse the device in water or other liquids.
5. Do not carry the appliance by the power cord. Do not pull on the power cord when disconnecting the plug from the outlet.
6. Do not use the device if the power cord, plug, or other parts of the device are damaged. To avoid electric shock, do not disassemble the device yourself - contact a qualified technician to repair it. Remember, improper assembly of the device increases the risk of electric shock during operation.
7. Children, people with reduced physical, sensory or mental capabilities, as well as people who do not have sufficient knowledge and experience, are allowed to use the device only under the supervision of persons responsible for their safety, or after instruction in the operation of the device. Do not let children play with the appliance.
8. Supervise the blender when children or pets are around.
9. Do not turn on the blender with an empty bowl. This could damage the device.
10. Do not leave a running blender unattended. Turn it off and unplug it when not using the device for a long time or before performing maintenance.
11. The blades are sharp. Don't cut yourself.
12. Before replacing accessories or additional parts that move during operation, turn off the device and disconnect it from the power supply. After turning off, wait until the blades have come to a complete stop.
13. Place the blender only on a stable, horizontal surface at least 10 cm from the wall and edge of the table.
14. Do not try to bypass the power-on lock of the device.
15. Do not drop the device or subject it to shock.
16. Keep the device out of the reach of children.
17. Use only the accessories or components offered by the manufacturer. Use of other optional accessories may damage the device or cause injury.


All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers