Coffee grinder

A coffee grinder is an undeniably useful thing.
But I don't have it. But I want to buy.

Can you advise what to take?
Criterias of choice. I want an inexpensive one, if both the grinding quality and reliability are normal.
Willing to pay more, ONLY if it is a SUPER thing.

Why should I:
I want to grind not only coffee, or rather, I do not need to grind coffee at all.
I want to grind sugar. To get powdered sugar.
Additional tasks: it would be nice to grind the grains of oats, rye, wheat. And rose hips. Peppercorns.

What to choose from? I see 3 types of coffee grinders:
1.manual
2.electric conventional
3. electric with two containers (at the top, for raw materials, at the bottom for the ground, ground product) and a regulator of the degree of grinding.

Who uses what? Please advise!

I have VIKOR. There she is. I really like grinding everything from peas to sugar.

A coffee grinder with two containers and several grinding modes (from 1 to 16) is convenient and, moreover, it is a millstone. But you have to choose a powerful one. I got a Bosch coffee maker when grinding 100 buckwheat into flour, although I don't use it often. A second coffee grinder with two Brown containers was more reliable and I use it almost every day to grind coffee. Grinding mode from 1 to 16 and container for 150 gr.
Conventional coffee grinders also grind cereals well, but in small portions.
In any case, all of these grinders are not intended for grinding cereals, they are designed only for coffee and small portions with a little rest between grinds. Look for special mills for making cereal flour on sale. They are on sale.

I have a regular bosch coffee grinder. In it, besides coffee, I ground buckwheat, oats, almonds. Has been working for 7 years.
But if you want to grind sugar, ordinary coffee grinders are not suitable for you, since the powdered sugar gets into the motor, bakes, the device breaks ...

[Admin]

Admin? do you grind sugar in yours?
And if not difficult, please specify the model of your Brown

Dashulya , and how much is your VICOR and which model?

[Admin]

Admin? do you grind sugar in yours?
And if not difficult, please specify the model of your Brown

Dashulya , and how much is your VIKOR and which model?

Why grind sugar into flour? I add granulated sugar to the bread, not powder. I even began to add honey according to the quantity in the recipe, but with an ordinary table spoon (and not a measuring one) with a hill, and as it is, it is semi-viscous, and I do not heat it up in a microwave to liquid. The taste has changed for the better, especially for rye bread. Refined ingredients are not always useful for bread.
If necessary for buns, I buy ready-made powdered sugar in sachets of 250 grams, it's not expensive and less hassle.
I bought the Brown coffee grinder a long time ago, the model - I did not find any numbers. It is written that it is manufactured in Mexico. Nevertheless, I am looking for a special real grinder mill, or an attachment for a BOSCH combine, it is more practical and more reliable, I don’t have to worry about what will burn out. They come with stone and metal millstones.

Admin, kidding me?
sugar - into powder. Buy "ground sugar" (powder) at a price of 100r kg. - the toad strangles me.
The coffee grinder will be even more expensive, but these goons will not get a dime

I cook jam, and cake in C / P, and when the sugar does not completely dissolve, it scrapes along the bottom with such a rattle that the heart breaks
so I want to add homemade powder instead of sugar.

Isn't it better to cover the berries with sugar and let them stand and feed on each other (like traditional jam), and when the sugar dissolves in the juice of the berries, pour everything into the oven and make the jam. And you don't need to add water, there will be a lot of juice.
And powdered sugar 250 gr. it is not expensive, it will be more expensive to hand over a coffee grinder for repair.Over there, my two container coffee grinder burned out from tension, and what to do with it now, how much will it cost to repair, where to do it, will they do it, etc. In the end, it will be cheaper to buy a new one. And what size the toad will then choke me!
Bottom line: things must be used strictly as intended!

"Bottom line: things must be used strictly as intended!" - I agree. Who else would have suggested where to get a mill for sugar and cereals.

but about the berries - so that the sugar would dissolve - you need to mix it regularly. And laziness.
and I also talked about cupcakes. there and dissolve it not where except in sugar or butter.

I agree that it is better to buy powdered sugar in a small package. These costs will not particularly affect the "thickness of the wallet".
But if someone can tell you where you can buy a special mill or a combine with the appropriate attachment, I will be very grateful. We in Nizhny Novgorod did not find this very necessary thing in any store.
I tried to grind a glass of buckwheat with a manual mill (like a mini-meat grinder), which I brought from Minsk many years ago. This venture ended with a big corn and a small pile of flour. I didn't have enough strength for more.

Guys, the grinder is only for coffee! And who is interested in the mill look here 🔗

I have a kitchen. comb. BOSCH MUM 47 ... and so, you can order a mill with stone millstones (there are also metal ones) in the service center. I called, it costs about 3 thousand. There is no way to go to Moscow yet. Maybe someone has already purchased it, share your impression. Thank you.

I have a kitchen. comb. BOSCH MUM 47 ... and so, you can order a mill with stone millstones (there are also metal ones) in the service center. I called, it costs about 3 thousand. There is no way to go to Moscow yet. Maybe someone has already purchased it, share your impression. Thank you.

I'm going there next week, then I'll tell you how it ended.

Marishka, thank you for the reference, of course, but I understand that the "base" for this attachment is worth a lot!
Does anyone have a cheaper option? I even agree to change my old Braun, which suits me, for something more modern, capable of being equipped with a similar attachment. But at a more affordable cost. Better yet. find somewhere a corrugator as a separate household appliance. Maybe you met someone?

There is also such a mini-blender (400 ml.) PHILIPS Cucina HR2860. There are two attachments to it. One for chopping vegetables, fruits and meat in small portions. The other is just for dry foods, including nuts, spices, cheese, coffee, sugar, rusks, rice and wheat. Once I tried to make flour from durum wheat. I ground it a little bit, but I still got pieces of different sizes. As a result, I sifted out about a glass of flour. I baked bread with her in a bread machine. It was delicious. From the rest I cooked porridge. But, there is no more desire. It's very dreary. I didn't make powdered sugar, but I think the device will cope with this. It costs about 1400 rubles.

[Suzy]

Suzy, this? :
🔗

Tashenka,
follow the link
🔗
and try searching. I do not have the opportunity to watch now, but if you have time and find something worthwhile - share!

[Suzy]

Suzy, this? :
🔗

Yes everything is correct. I just use it. It is convenient in that you can prepare a cocktail, sauce, or chop vegetables in small portions. But to grind large quantities of grain, it is hardly suitable. This still requires a more powerful mill.
If you see this mini blender you will not regret it. It is convenient to wash. The knife with the bowl is one piece. Good luck !!!

Tashenka,
follow the link
🔗
and try searching. I do not have the opportunity to watch now, but if you have time and find something worthwhile - share!

My coffee grinder costs about 500 rubles, and model НХ-3432

Thanks for the link, but there are only coffee grinders and grinders for pepper and salt.
I will wait. Maybe someone will find something ...

Today I was at the BOSCH service center and made an order for a grain mill - an attachment for the MUM 4756 food processor, which I have. There are mills with metal and stone millstones (I chose with stone ones). grinds wheat, rye, buckwheat, shelled barley, shelled oats, millet, rice, corn, and even oil-containing seeds and seeds. Capacity about 500 grams, grinding speed from 25 to 90 grams per minute, depending on the degree of grinding. The fineness is coarse, medium, fine, very fine, and intermediate settings are possible. The cost of such a toy is about 4000 rubles, order execution up to 3 months.
I also bought an ICE CROP - also a harvester attachment - the cost of 1,700 rubles, was available.
I am completely satisfied with the combine, powerful, kneads a tough dough, 3 whisks for beating, a meat grinder, a mixer-glass, a vegetable cutter, a citrus juicer. Most often, of course, I use whisks, a meat grinder.

valuable information! now I wonder if my harvester (philips) has such attachments ... we will look!

[Romchka]

Today I was at the BOSCH service center and made an order for a grain mill - an attachment for the MUM 4756 food processor, which I have. There are mills with metal and stone millstones (I chose with stone ones). grinds wheat, rye, buckwheat, shelled barley, shelled oats, millet, rice, corn, and even oil-containing seeds and seeds. Capacity about 500 grams, grinding speed from 25 to 90 grams per minute, depending on the degree of grinding. The fineness is coarse, medium, fine, very fine, and intermediate settings are possible. The cost of such a toy is about 4000 rubles, order execution up to 3 months.
I also bought an ICE CROP - also a harvester attachment - the cost of 1,700 rubles, was available.
I am completely satisfied with the combine, powerful, kneads a tough dough, 3 whisks for beating, a meat grinder, a mixer-glass, a vegetable cutter, a citrus juicer. Most often, of course, I use whisks, a meat grinder.

Romchka, well done! Congratulations on your order! Get the mill, write down the impression. I also put my eyes on her, otherwise you can't always buy the necessary flour

As soon as - so immediately, I myself am eager to use it, the order execution time is up to 3 months. The manager said - the last one was recently sold, and the last one was bought, as well as to order.
Wait for an answer.

Offer to Muscovites.
There is such a magazine: Modelist constructor
🔗

So it offers drawings for the homemade mill.
Perhaps you have a man in the house who could implement the proposed improvements to the meat grinder, for example.
Then maybe you would visit the editorial office and assess the reality of the proposed innovations, and buy a magazine. I don’t think it’s expensive, but I’m willing to share in the costs. since it will still be cheaper (together with manufacturing) than these expensive attachments. Combines have already been purchased from us, but of other models.
Mill in miniature
🔗
Table-top mill for grinding cereal grains driven by a washing machine engine and a housing made of a synchronizer clutch for a gearbox of a GAZ-53 car: design drawings, wiring diagram

meat grinder flour
🔗
Mill-attachment for a conventional meat grinder for grinding cereals and grains (including coffee).

Home mill
🔗
Micro mill "Malyutka" for the preparation of compound feed based on a 180 W electric motor with a productivity of 0.2 - 0.5 buckets per minute; drawings, wiring diagram, design description.

Flour from ... a meat grinder
🔗
A simple attachment for a conventional meat grinder turns it into a mini-mill for any grain and even coffee.

If you are so kind to answer, you calculated how much it will cost if all this is put together and brought to mind. who can do it with their own hands, where to get all these personal belongings you listed, what is the guarantee that this structure will work, and how to place this structure in a kitchen measuring 6-8 meters.It would be nice if you made a rough estimate of what ingredients are included in the design, how much they cost, and how much the work costs to put it all together. Then let's think, maybe for three people, and we will grind the groats in turn.
And what. a good idea!

Admin, I will make an estimate and a drawing. I would only have to look at the drawing once. And the idea of ​​what materials are proposed to be used for "millstones", and what proposals, where to get them

I propose to open the topic "crazy hands"!
The idea is good, but not everyone can implement it - there is not enough knowledge and skill. so the majority of home appliance users will still turn to the store for a finished product ...

The fact is that in the store there are a lot of very low-quality, unfinished and expensive things that also need to be looked for.
Am I wrong?

in order not to buy a low-quality thing, there is the Internet - there is a lot of information, hands - you can touch, well, your head on your shoulders to think about the need to buy.
but in order to make the most high-quality thing, you need at least the ability to make something. and you need to buy high-quality materials (again, you need to choose somewhere so as not to buy low-quality ones). and it would still not hurt to be confident in the quality of the circuit, etc.
in short, everyone chooses according to their capabilities. after all, by and large, you can go home and bring the millstones - it's hard, but we'll save electricity

[fugaska]

fugaska I liked the kitchen. harvester KENWOOD, expensive but worth it. He has, among other things, grits mill attachments, a device for rolling thin dough and cutting noodles, kneading hooks, and something else (see the Internet).
If you collect everything separately from different companies, for the money you get the same thing - one KENWOOD base + nozzles for it. I was choosing between KENWOOD and Bosch, I won Bosch only because I have a lot of home appliances from this company. It seems to me that I was not mistaken in my choice.

So I really like Boshevsky (I just didn't look at Kenwood's options), but I also bought everything separately, as needed. I’m sitting with a Philips harvester and I don’t know if it has such attachments (I want an ice cream maker, and it wouldn’t hurt to grind cereals, sugar, etc.). I still don’t get my hands on calling the service center - maybe I’ll get some information there ...

Admin, thank you very much for the information about the stone mill for the BOSCH combine. Please tell me, is it necessary to make an advance payment at the service center and how much?
And one more question, for sure you have already made ice cream. Could you tell us about the cooking process. Is it difficult?
Thank you

Admin, thank you very much for the information about the stone mill for the BOSCH combine. Please tell me, is it necessary to make an advance payment at the service center and how much?
And one more question, for sure you have already made ice cream. Could you tell us about the cooking process. Is it difficult?
Thank you

(it's impossible to get through, it's better to go right away) you don't need to make an advance payment, first order, payment upon receipt, the cost of the mill is about 4000 rubles.
I haven't made ice cream yet. But the principle is as follows: a working container (bowl) with a volume of 1 liter. first chill in the freezer for at least 8 hours (permanent storage of the bowl in the freezer is allowed) , connect the bowl to the food processor, add all the whipped and mixed ingredients into it, start the food processor and stir with nozzles for 15-50 minutes, depending on the recipe and ingredients. The ice cream is ready.
It seems to me not difficult, especially since the bowl can be constantly kept in the freezer, which means it is always ready, and it takes a little time to prepare the ice cream itself.

It seems to me not difficult, especially since the bowl can be constantly kept in the freezer, which means it is always ready, and it takes a little time to prepare the ice cream itself.

In the winter I managed to get through there, then they told me about the prepayment, and the price was named below. Anyway. It doesn't matter anymore. In the near future I will go to Moscow and will definitely order a mill.In one of our stores, we now have constantly wonderful durum wheat (it can also be germinated). When you have something to grind the grain, you get a wonderful flour.
And I'll think about ice cream ... do I need it?

[Suzy]

Suzy In the mill it will be possible to grind not only wheat, but also rice, buckwheat, corn grits, flakes - why not flour!
Please note that only durum flour is suitable for baking bread, this one is not suitable.
Unfortunately, I was also planning to buy a mill for a long time, a couple of years ago the price was called about 3.0 thousand, and metal millstones are even cheaper. I believe that there is no need to waste any further time, a thing that is necessary for the house, and is purchased for more than one year.
And then, when there is an opportunity to make any flour from anything at home, it becomes possible to bake different confectionery, pancakes, bread, etc. from different flours.

I really need to buy a coffee grinder and I was completely lost with the choice. I want a millstone to grind coffee and, if possible, cereals. The choice is between BRAUN, DeLonghi and Kenwood. Here's a link 🔗
Does anyone have these grinders? I'm leaning in favor of Kenwood, but I can’t decide.

I have a Braun coffee grinder, millstone-14 steppes of grinding. Coffee can be ground for any coffee machine (espress, geyser, turk). My wife ground eggshells in it, crushed them into powder, but I read somewhere that they do not recommend grinding other products in it. And so the thing is convenient. The large tank holds 250g. coffee, closes very tightly on top, that is, the aroma of coffee does not disappear, and you can grind it into a different number of cups.

[Admin]

I also have a Brown coffee grinder. I only grind coffee in it. I have a coffee maker - espresso - you can't think of a better coffee grinder, you can choose your grind for any type of coffee. I don't risk cereals, it's a pity to break a good appliance, and it says only coffee.
Admin, did you get a grinder attachment for Bosch? Have you tried it already? Liked? And then I also think about such a thing, although, it is expensive, of course, but sometimes for some reason the stores do not have the same powdered sugar, cornmeal, etc. Please share your impressions.

Are Delongy and Kenwood no one else? So it's all for Brown! Thanks for the feedback!

I want a millstone to grind coffee and, if possible, cereals.

I also thought about a millstone mill, I was surprised at the large selection of them in the store, I did not even expect that there were so many of them)
The question is different:
if I grind buckwheat, rice - do I need to rinse (and dry) the cereals first?
I am confused that the croup is always pretty dirty and dusty.

[Country stove,]

Country stove,

And here is the freshest joke.
I also ordered a millstone coffee grinder for myself Bork, on Monday they should bring it so that for the previous purchase the discount could be credited to the bonus card. Rather, I chose such a gift for myself by March 8
Well, this technique will be smaller than a bread maker, fuss with it less if that ... I really wanted to grind coffee into the dust for my tiny electric coffee maker for Turkish coffee (I wrote about this in a post about coffee makers, they brought me from Turkey)

Well, God forbid ...

Are Delongy and Kenwood no one else? So it's all for Brown! Thanks for the feedback!

Why not. I have a Vitek millstone coffee grinder, I really like it-automatic-any kind of grain grinding.
And I grind cereals on a regular cheap one with knives.

[Admin]

Today I was at the BOSCH service center and made an order for a grain mill - an attachment for the MUM 4756 food processor, which I have. There are mills with metal and stone millstones (I chose with stone ones). grinds wheat, rye, buckwheat, shelled barley, shelled oats, millet, rice, corn and even oil-containing seeds and seeds. Capacity about 500 grams, grinding speed from 25 to 90 grams per minute, depending on the degree of grinding. The fineness is coarse, medium, fine, very fine, and intermediate settings are possible.The cost of such a toy is about 4000 rubles, order execution up to 3 months.
In the same place I bought an ICE CROWN - also a nozzle for the combine - the cost of 1700 rubles, was available.
I am completely satisfied with the combine, powerful, kneads a tough dough, 3 beaters for beating, a meat grinder, a glass mixer, a vegetable cutter, a citrus juicer. Most often, of course, I use whisks, a meat grinder.

Admin, please tell me what are your impressions of this mill and ice cream maker to Bosh. Are you satisfied with their work?
I want to go to our service center and order, the order execution time is about 3 months.
Did you order anything else from additional attachments?

I bought my harvester a few days ago. Really like

Ideally, I would like a coffee machine, but I have no talent at all: red: earn such huge money, which even the simplest coffee machine costs. I can only count on a 15-bar carob, and then not now, but in the new year, when I leave the decree (at the end of December) and if the salary of a simple non-district doctor will allow me to postpone a certain amount for a few months .. Yes, and buy, perhaps , will have to again in Khabarovsk, we have a meager selection of household appliances in the city of more or less decent brands. I am not worried about the usefulness and harmfulness of strong coffee - any of the most useful can be harmful if not consumed in moderation, and real coffee lovers observe the culture and traditions of drinking - you can learn from them.
I also thought about the coffee grinder - after all, First is simple, grinds well, increasing the grinding time increases the degree of grinding - maybe I'm wrong and I need a coffee grinder with millstones unambiguously? About what I'm going to put in the coffee maker. Good coffee cannot be cheap, I hope there will be money for a small amount of high-quality coffee, as compensation for the absence of bad habits like Tortyzhka's. Although eating high-quality and tasty is a kind of bad habit, compared to omnivorous.
Still, I hope that I will have such a useful thing as a coffee maker
Thanks for answers!

[musyanya]

musyanya, a simple grinder is not suitable for coffee makers. There should be a grind uniform, not too large and not too small. Such grinding can only be done by a coffee grinder with burrs, which has a regulator for grinding beans. Otherwise, you simply won't get it, not that good coffee, but you have a chance not to get coffee at all, plus the coffee maker will quickly fail ... Of course, there are coffee machines equipped with coffee grinders, but they are much more expensive than 15-bar carob coffee makers.

Here's how I used to live without your help (by the way, it's bad, judging by the bad experience of purchasing the first bread machine)? Thank you for helping me with advice!
Now I need a grinder with a dozen grindstones! And I have already seen what kind of model to buy! Or maybe my husband will buy me a coffee maker and a coffee grinder for some feat of mine ?!
Thank you, I love you all !!!

Who can tell you how to clean this grinder? Does she, in general, somehow understand?

Who can tell you how to clean this grinder? Does she, in general, somehow understand?

Understands. I found instructions on it with pictures, Russian on page 16
🔗 But I found very negative reviews about the work of this coffee grinder!

[Anastasia]

We have such a coffee grinder. Anastasia, and what are they complaining about? Maybe you need to read to want a new one?

Girls, can we move to coffee grinders? I ordered a KRUPS GVX 242 on March 8th. As for the grain, I have a special attachment for the combine.